| Chapter 6 | LIGA and Micromolding |
1. Caption of Figure 6.28 should read: Fabrication of a LIGA mold insert. (From Hagman, P. et al., Fabrication of Microstructures with Extreme Structural Heights by Reaction Injection Molding, presented at the First Meeting of the European Polymer Federation, European Symp. on Polymeric Materials, Lyon France, 1987, With Permission.) Thanks to Dr. Svetlana Tatic-Lucic (Lehigh University).
2. Page 329 Equation 6.4 : the unit for λc is Angstroms or Å
3. Page 348 Under equation 6.13 it should say: In the correction term
of Equation 6.12, the electrode ... Thanks to Rabih Zaouk (UC Irvine).
4. Page 348 Sixth line from the bottom on the right column: ...with decreasing
electrode radius (1/r).
5. Page 359 TABLE 6.14 legend should read: Pros and Cons of RIM or Liquid Resin Molding. Thanks to Dr. Svetlana Tatic-Lucic (Lehigh University).
6. Page 362 18th line from the bottom on the left column should read: ... that exceeds the glass transition temperature or ... Thanks to Rabih Zaouk (UC Irvine).